Draw Distance Circle Google Earth

WithArcGIS Earth, you lot can do the following:

• Describe and edit placemarks, paths, polygons, ground overlays, screen overlays, and KML network links.
• Measure points, lines, paths, circles, and polygons in 3D.

Draw

Yous can create placemarks, paths, polygons, ground overlays, screen overlays, and KML network links on the world and save them in the My Drawings folder in the tabular array of contents.

In one case you've finished drawing an chemical element, it appears in the table of contents. The newly created drawing chemical element is considered equally a KML feature and is listed in My Drawings. You tin double-click it to go to this feature or edit it by right-clicking the layer properties. ArcGIS Earth as well supports saving drawings as a KMZ file. This tin be done by individual layer or past binder. See Share your work for details.

Describe points, lines, and polygons

Points, lines, and polygons are basic drawing elements and also common features used in KML. To create and edit a drawing chemical element every bit betoken, line, or polygon, complete the following steps:

1. Click Draw on the toolbar. Cull Bespeak from the drib-downward menu to add a placemark, choose Line to add a path, or choose Polygon to add a polygon.
2. Click to create a point as a KML placemark, or double-click to finish sketching a path or a polygon. Click while pressing Alt to switch to freehand mode while sketching a path or a polygon.

   The drawing chemical element is automatically saved in the table of contents once you finish.

   A toolbar appears at the top of the view while you draw.

3. Use the Continue Sketch , Finish Sketch , Delete Vertex , Undo , or Redo options of the selected drawing element.
4. To edit the geometry of a drawing chemical element, elevate a selected signal or vertex to move its position, or hover the arrow over an existing line to insert a new vertex.
   • Edit the position of a selected vertex with the XYZ axis for a cartoon element with relative or absolute distance.
   • Specify XYZ value for a selected vertex.
   • Right-click or utilise keyboard shortcuts to redo, disengage, or delete a selected vertex.
   • Hover the pointer forth the drawing element, while the pointer style switches to Add Vertex and click to add new vertex.
5. On the Edit panel, configure the cartoon properties using the General, View, and Info tabs.
   • Full general—Change the name, geometry, and appearance of a drawing chemical element. Drawing elements with a relative or absolute distance can be extruded from the ground.
   • View—Set and salvage the fly-to view of the electric current drawing element past clicking Snapshot electric current view. Reset the fly-to view of the cartoon chemical element to the center of the screen by clicking Reset to center.
   • Info—Type descriptions, or edit the HTML code and preview it for the drawing elements on the Rich Text tab. The description is displayed in a popular-up window when you click the cartoon element.
6. Close the Edit panel to exit drawing style.

   A dialog box appears for saving drawings if you exited with unsaved content.

7. To edit a drawing element again, two options are bachelor:
   • Right-click the layer in the table of contents and select Backdrop.
   • Click a drawing element in the scene, right-click, and select Properties.

• For points, you can paste an image URL or select a local icon as the custom icon, which is limited to 1 MB. After importing, the size is limited to a maximum of 128 pixels. ArcGIS Earth supports icon formats of .png, .jpg, .jpeg, .tif, and .tiff.

• Yous can add upward to five custom colors. Utilize the eyedropper to capture colors from the screen, and specify accurate colors with HEX, HSL, or RGB values.
• ArcGIS Globe supports three types of altitude mode: draped, absolute, and relative.

Tip:

Y'all can elevate a service URL or a data path into the viewport or the tabular array of contents, and the services will brandish as if you had typed the URL in the Add Data panel.

Create a basis overlay

A basis overlay is an image that is tied to latitude-longitude coordinates and anchored relative to the ground. Basis overlay is intended to exist used for maps that testify additional information in a KML file. To create and edit a ground overlay, complete the post-obit steps:

1. Click Draw on the toolbar. Choose Ground Overlay from the drop-downwardly menu to add a footing overlay.
2. Paste an paradigm URL or browse to select a local image.

   The ground overlay is automatically saved in the tabular array of contents once you lot finish.

3. On the Edit panel, configure ground overlay properties on each tab.
   • Full general—Modify the name, prototype path, transparency, draw order, and altitude of a ground overlay.
   • View—Set and save the fly-to view of the current drawing element by clicking Snapshot current view. Reset the wing-to view of the drawing element to the center of the screen by clicking Reset to eye.
   • Refresh—Specify the refresh mode and refresh time interval. Time-Based Refresh manner refreshes the view based on fourth dimension, and View-Based Refresh mode refreshes the view based on changes in the user'due south view.
   • Location—Specify the position of a ground overlay with a bounding box. Change the bounds to nonrectangular quadrilateral by clicking Convert to LatLonQuad. Modify the bounds to fit the current screen by clicking Fit to Screen.
   • Info—Blazon descriptions, or edit the HTML lawmaking and preview it for the drawing elements on the Rich Text tab. The description is displayed in a pop-up window when you click the cartoon element.
4. Drag or resize the bounding box to move, scale, and rotate the ground overlay. Correct-click and choose Undo or Redo , or apply keyboard shortcuts to command the geometry editing process.
5. Shut the Edit console to exit drawing mode.
6. Right-click the layer in the table of contents and select Properties to edit the ground overlay again.

Create a screen overlay

A screen overlay is an image that is stock-still to a specified area and anchored relative to the screen. Screen overlay is intended to exist used as a legend or a supplemental text in a KML file. To create and edit a screen overlay, consummate the following steps:

1. Click Draw on the toolbar. Cull Screen Overlay from the driblet-down carte du jour to add together a screen overlay.
2. Paste an paradigm URL or browse to select a local image.

   The screen overlay is automatically saved in the tabular array of contents once yous finish.

3. On the Edit panel, configure screen overlay backdrop on each tab.
   • General—Change the proper noun, epitome path, transparency, and draw order of a screen overlay.
   • View—Set and relieve the fly-to view of the current drawing element past clicking Snapshot electric current view.
   • Refresh—Specify the refresh manner and refresh time interval. Time-Based Refresh style refreshes the view based on time, and View-Based Refresh style refreshes the view based on changes in the user's view.
   • Format—Specify a point on the screen that is mapped relative to the screen origin through Screen Position. Specify a point on (or outside of) the overlay image that is mapped to the screen coordinate through Overlay Position. A value of Fraction indicates the ten,y value is a fraction of the image or the screen. A value of Pixel indicates the x,y value is calculated in pixels. The size of the image overlay can exist specified through parameters in Size.
   • Info—Type descriptions, or edit the HTML code and preview it for the drawing elements on the Rich Text tab. The description is displayed in a popular-upward window when you click the drawing element.
4. Drag or resize the bounding box to movement and scale the scale overlay. Right-click and cull Undo or Redo, or employ keyboard shortcuts to control the geometry editing process.
5. Close the Edit panel to go out drawing mode.
6. Correct-click the layer in the tabular array of contents and select Properties to edit the footing overlay over again.

You can create a ground overlay or a screen overlay with image formats of .png, .jpg, .jpeg, .bmp, .tif, .tiff, and .gif.

Create a network link

A network link is a mode of making a dynamic KML file with a file from your local machine or from a server. To create and edit a network link, complete the following steps:

Mensurate

In ArcGIS World, yous can measure the coordinates of a indicate, the area of a shape, the length of a line, the distance of line segments, and 3D distance between points. Earlier or after performing each measurement, you lot can alter the default units of measure in the awarding settings. The options are equally follows:

• Except for 3D measure, ArcGIS Earth calculates the geodetic distance, which represents the shortest line betwixt ii points on the oblong surface of the earth sphere.
• You can modify the vertex of a path or a polygon while sketching.

---

Feedback on this topic?

colemandaunded.blogspot.com

Source: https://doc.arcgis.com/en/arcgis-earth/use/draw-and-measure.htm

Share this post